Polerowanie elektrochemiczne wybranych stali

Electrochemical polishing of selected stainless steels

  • Marcin Kułakowski Politechnika Koszalińska, Katedra Inżynierii Systemów Technicznych i Informatycznych
  • Krzysztof Rokosz Politechnika Koszalińska, Katedra Inżynierii Systemów Technicznych i Informatycznych
Keywords: alloy austenitic steels, electrochemical polishing, roughness measurement

Abstract

The AISI 316Ti (EN 1.4571) austenitic stainless steel sample (50 × 30 × 1,5 mm) was used for the study. The main elements forming the steel are: chromium (16-18%), molybdenum (2.0-3.0%), nickel (10.0-14.0%), titanium (max 0.7%), and iron as the rest of the steel composition. The electrolytic polishing operations were performed at the current density of 50 A/dm2. The main elements of the electropolishing setup were a processing cell, a DC power supply RNG-3010, the electrodes and connecting wiring. The studies were carried out in the electrolyte of initial temperature of 50±5  °C. For the studies, as the electrolyte a mixture of two acids, i.e. H3PO4:H2SO4 equal to 60%:40%, was used.  For surface characterization the 3D roughness parameters(Sa=0.744 μm,  Sq=0.984; Sp=2.32, Sv=3.5, St=5.88; Ssk=–0.898; Sku=2.97) regarding  ISO25178 were used.

References

1. Bąk J., Gajda D., Wpływ substancji psychoaktywnych na zachowanie kierowców, „Logistyka” 2009, nr 6.
2. Datasheet: Stainless Steel 1.4571 - 316Ti, Equinox International Ltd, (2012) 1-3
3. Hryniewicz T., Lewicka-Rataj K., Rokosz K., On the biological response of austenitic stainless steels after electrochemical -EP and MEP- polishing, World Scientific News, 80 (2017) 284-296
4. Hryniewicz T., On Discrepancies Between Theory and Practice of Electropolishing, Materials Chemistry and Physics, 15(2) (1986) 139-154
5. Hryniewicz T., Physico-chemical and technological fundamentals of electropolishing steels (Fizykochemiczne i technologiczne podstawy procesu elektropolerowania stali), Monograph No. 26(1989), Koszalin University of Technology Publishing House, ISSN 0239-7129 (in Polish)
6. Hryniewicz T., Rokicki R., and Rokosz K., Co–Cr alloy corrosion behaviour after electropolishing and ‘magnetoelectropolishing’ treatments, Materials Letters, 62(17–18) (2008) 3073-3076
7. Hryniewicz T., Rokicki R., and Rokosz K., Corrosion and surface characterization of titanium biomaterial after magnetoelectropolishing, Surface and Coatings Technology, 203(10–11) (2009) 1508-1515
8. Hryniewicz T., Rokicki R., Rokosz K., Magnetoelectropolishing for metal surface modification, Transactions of the Institute of Metal Finishing, 85(6) (2007), 325-332
9. Hryniewicz T., Rokosz K., and Sandim H. R. Z., SEM/EDX and XPS studies of niobium after electropolishing, Applied Surface Science, 263 (2012) 357-361
10. Hryniewicz T., Rokosz K., Corrosion resistance of magnetoelectropolished AISI 316L SS biomaterial, Anti-Corrosion Methods and Materials, 61(2) (2014) 57-64
11. Hryniewicz T., Rokosz K., Investigation of selected surface properties of AISI 316L SS after magnetoelectropolishing, Materials Chemistry and Physics, 123(1) (2010) 47-55
12. Hryniewicz T., Rokosz K., Polarization characteristics of magnetoelectropolishing stainless steels, Materials Chemistry and Physics, 122(1) (2010) 169-174
13. Hryniewicz T., Rokosz K., Rokicki R., and Prima F., Nanoindentation and XPS studies of Titanium TNZ alloy after electrochemical polishing in a magnetic field, Materials, 8(1) (2015) 205-215
14. Hryniewicz T., Rokosz K., Valíček J., and Rokicki R., Effect of magnetoelectropolishing on nanohardness and Young’s modulus of titanium biomaterial, Materials Letters, 83 (2012) 69-72
15. Hryniewicz T., Rokosz K., Valiček J., Rokicki R., Effect of magnetoelectropolishing on nanohardness and Young’s modulus of titanium biomaterial, Materials Letters, 83 (2012) 69-72
16. Nowak J., Bezpieczeństwo samochodów i ruchu drogowego, WKiŁ, Warszawa 2004.
17. Rokicki R., Apparatus and method for enhancing electropolishing utilizing magnetic field. US Patent 7632390, December 15, 2009
18. Rokicki R., Hryniewicz T., Enhanced oxidation-dissolution theory of electropolishing, Transactions of The Institute of Metal Finishing, 90(4) (2012) 188-196
19. Rokicki R., Hryniewicz T., Konarski P., Rokosz K., The alternative, novel technology for improvement of surface finish of SRF niobium cavities, World Scientific News, 74 (2017) 152-163
20. Rokosz K, Hryniewicz T., Rokicki R., XPS measurements of AISI 316LVM SS biomaterial tubes after magnetoelectropolishing, Tehnicki vjesnik - Technical Gazette, 21(4) (2014) 799-805
21. Rokosz K., Electrochemical Polishing in magnetic field (Polerowanie elektrochemiczne w polu magnetycznym), Koszalin University of Technology Publishing House, Monograph No. 219(2012) ISSN: 0239-7129 (in Polish)
22. Rokosz K., Hryniewicz T., and Raaen S., Characterization of passive film formed on AISI 316L stainless ste O.-M el after magnetoelectropolishing in a broad range of polarization parameters, Steel Research International, 83(9) (2012) 910-918; DOI: 10.1002/srin.201200046
23. Rokosz K., Hryniewicz T., Raaen S., and Malorny W., Fabrication and characterisation of porous coatings obtained by plasma electrolytic oxidation, Journal of Mechanical and Energy Engineering, 1(1|41) (2017) 23-30
24. Rokosz K., Hryniewicz T., Raaen S., Characterization of Passive Film Formed on AISI316L Stainless Steel after Magnetoelectropolishing in a Broad Range of Polarization Parameters, Steel Research International, 83(9) (2012) 910-918
25. Rokosz K., Hryniewicz T., Raaen S., XPS analysis of nanolayer formed on AISI 304L SS after high-voltage electropolishing (HPEO), Tehnički Vjesnik-Technical Gazette, 24(2) (2017) 321-326
26. Rokosz K., Hryniewicz T., Simon F., and Rzadkiewicz S., Comparative XPS analyses of passive layers composition formed on duplex 2205 SS after standard and high current-density electropolishing, Tehnički Vjesnik-Technical Gazette, 23(3) (2016) 731-735
27. Rokosz K., Hryniewicz T., Solecki G., Comparative corrosion studies of 2205 duplex steel after electropolishing and passivation in Ringer’s solution, World Scientific News, 95 (2018) 167-181
28. Rokosz K., Hryniewicz T., XPS Analysis of nanolayers obtained on AISI 316L SS after Magnetoelectropolishing, World Scientific News, 37 (2016) 232-248
29. Rokosz K., Lahtinen J., Hryniewicz T., and Rzadkiewicz S., XPS depth profiling analysis of passive surface layers formed on austenitic AISI 304L and AISI 316L SS after high-current-density electropolishing, Surface and Coatings Technology, 276 (2015) 516-520
30. Rokosz K., Simon F., Hryniewicz T., and Rzadkiewicz S., Comparative XPS analysis of passive layers composition formed on AISI 304 L SS after standard and high-current-density electropolishing, Surface and Interface Analysis, 47(1) (2015) 87-92
31. Simka W., Nawrat G., Chlodek J., Maciej A., Winarski A., Electropolishing and anodic passivation of Ti6Al7Nb alloy, Przemysł Chemiczny, 90(1) (2011) 84-90
Published
2018-06-21
Section
Eksploatacja i Testy/Exploitation and Tests